shail
Fri, 02/27/2015 - 21:15
Permalink
Is there any way to check if ESP-8266 boards are not defective. I am using USB TTL serial adapter. It has five pins. 5V, RX, TX, GND, 3.3V.
I've connected in following way RX<->TX, TX<->RX, GPIO0<->3.3V, GPIO15 <-> GND
I don't see any response in minicom, I've also tried coolterm. I've tried 9600, 11500 baud rates. There is no way to set 76800 in both software.
More information about text formats
Is there any way to check if
Is there any way to check if ESP-8266 boards are not defective. I am using USB TTL serial adapter. It has five pins. 5V, RX, TX, GND, 3.3V.
I've connected in following way
RX<->TX, TX<->RX, GPIO0<->3.3V, GPIO15 <-> GND
I don't see any response in minicom, I've also tried coolterm. I've tried 9600, 11500 baud rates. There is no way to set 76800 in both software.